The global plumbing industry experienced growth in 2020 despite the effects COVID-19 has had on economies. As of today, annual plumbing revenue amounts to a whopping 107.3 billion dollars.
How has plumbing managed to maintain so much momentum?
Put simply, people run into a lot of issues with their water. Among the many issues you might run into with your plumbing, we’re willing to bet that one of the most common will be low water pressure.
If you’ve recently been battling low water pressure in house snags like dripping shower heads, meek sprinklers, lazy dishwashers, and the like, keep reading. By doing so, you’ll discover 9 excellent tips on how you can solve your pressure problems!
1. Remove Your Flow Restrictor
Is your low water pressure in house annoyance relegated to your shower head? If it is, depending on where you live, a flow restrictor may be what’s to blame.
Flow restrictors are rubber rings some areas mandate be included in shower heads. These restrictors significantly cut the amount of water that is allowed to flow during a shower.
If you remove your shower head and use tweezers to pull out your flow restrictor, you’ll notice an immediate difference in your pressure.
2. Clean Your Water Dispenser
Sometimes water pressure issues boil down to having a dirty dispenser. Shower heads, for example, build up hard water sediment deposits that can block water’s ability to flow out of your head’s pores. The same goes for faucets.
Take any safe cleaning solution and soak your water dispenser in it for 5 minutes. Then, gently rub over its pores with a sponge to dislodge any gunk that may be restricting your water flow.
3. Open Your Water Valve
Most homes have a primary water valve that allows you to cut water to the property. This valve is sometimes closed when maintenance people come to work on plumbing or landscaping issues that require digging.
If you noticed your water pressure suffered shortly after your water was turned off, your issue is almost certainly a water valve that’s partially closed. Find your valve, turn it on all the way, and you’ll be back in business!
4. Inspect Your Water Lines
Kinks in your water line may be restricting your water flow. Scan your hose, shower head tube, or other water source’s line for imperfections to see if a flaw could be the reason for your struggles.
Severally damaged water lines are best replaced as no amount of massaging or untangling can resurrect water’s ability to flow through deeply pinched or fractured tubing.
5. Scout Leaks
When you talk to a plumber about low water pressure, one of the first things they’ll suggest could be the problem are leaks. The issue with leaks is that given the volume of piping your home features, they can be very hard to find.
If you have a water gauge on your home, note what level it’s at and revisit it in a couple of hours without running any water. If you notice your gauge has moved, you have a leak.
Where that leak is, is something you’ll have to work with a professional to discover.
6. Explore Your Water Heater
Low hot water pressure is almost always an issue with your water heater.
Check yours to ensure that its valve is turned all the way on. If it is, safely inspect your water heater’s tank to make sure it’s free from clogs. Giving your tank a flush and cleaning it can be instrumental in alleviating any issues it may be having passing water through to your home.
7. Replace Your Fixtures
Old faucets, shower heads, hoses, and the like may have issues that a simple cleaning or finessing can’t solve. If you’re still dealing with water pressure issues with a single fixture after washing it and checking for visible defects, you may want to replace it altogether.
This can be a challenge depending on how much your fixture costs. If your fixture is low-cost, rather than wasting time troubleshooting, swap it out and see what happens. If the issue doesn’t resolve, you may be able to return your replacement.
8. Take Advantage of Off-Peak Hours
Houses that share water infrastructures with other properties may run into low water pressure problems during peak hours. These peak hours are usually on weekday mornings before work and in the evening just after dinner.
Try running your water during off-peak hours to see if your pressure improves at all. If it does, there’s not much you’ll be able to do about your pressure issues short of rerouting your home’s access to your city’s water supply.
9. Call a Plumber
When all else fails in your battle against low water pressure, call in a professional. No amount of DIY work can replace their expertise and ability to get a job done right the first time.
Several plumbers offer free quotes/diagnoses so don’t be afraid to put in a call and see what perspective they have to share.
Low Water Pressure in House Issues Don’t Have to Be Your Norm
Several families that battle low water pressure in house problems let those issues become part of their daily lives. Don’t fall into that pattern of indifference! Instead, get proactive.
As we’ve hopefully showcased, solving low water pressure problems isn’t a complicated process. All it takes is a little trial and error and when all else fails, a phone call to a professional.
For more insight on all things home, family, and lifestyle, explore the newest content we have featured in our blog!