If you’re planning to install your new air conditioner (AC), it may not be as easy as you think. There are some common mistakes most installers make that’ll affect the efficiency of your unit. Air conditioners are pricey, and you want to make sure that your AC unit works for a very long time. Read further as we give you a thorough guide on five common air conditioner installation mistakes and how to avoid them.

Selecting the Incorrect Size of AC Unit Required

The first and most common mistake DIY (Do it yourself) air conditioner installers make is selecting the incorrect size of the AC unit that’s required. The incorrect size of the aircon unit can have some detrimental effects on the efficiency of your electricity, and the unit possibly malfunctioning. If the unit is too small for your home, it leads to the unit overworking. The unit will run incomplete cycles if it’s too large. Morris Jenkins offers free estimates and consultations to help you choose the correct size of an AC unit for your home.

Positioning the AC Unit in the Incorrect Location

Another regular mistake AC installers make is positioning the unit in the incorrect location. Air conditioners need to be placed in an open space, out of direct sunlight. If it’s placed in the wrong location, the unit won’t function at optimal efficiency, and it’ll use a lot of unnecessary electricity. Outdoor air conditioners should be placed in an open area. There needs to be a minimum of five feet between the unit and surrounding foliage.

Placing the Thermostat in the Incorrect Area

One of the best tips for installing your AC unit is ensuring that the thermostat is installed in the correct location. Most installers are unaware of this important tip, which makes it one of the most common mistakes. You must always install the thermostat as far away as possible from sunlight and air vents. If you install the thermostat in the wrong place, your AC unit will undergo needless wear and tear.

Not Sealing the Ductwork Properly

You must ensure that the ductwork of the AC unit is properly sealed. The internal workings and the efficiency of your AC unit greatly depend on it. All cracks must be sealed with a permanent sealer compound. Never try to seal the ductwork with tape. Using tape is never a good idea, as letting forced air seep through any cracks may damage your AC unit irreversibly.

Installing the Vents in the Wrong Places

Placing the vents in the correct areas will ensure you get the AC unit working at optimal efficiency in the areas where it’s needed the most in the home. Vents should be spread out evenly throughout your home. The vents should also be placed in areas with minimal obstruction to allow for proper airflow.

Final Thoughts

If you follow this guide, you’ll have your air conditioner working at optimal efficiency in your home in no time. You’ll have the pleasure of having an air conditioner that’ll provide you with great comfort and service for a very long time. If you’re still unsure, it may be best that you contact a professional to assist you with installing your AC unit. Your air conditioner is expensive, and you don’t want to replace it because some of these simple steps weren’t followed.